This is the text you need to work on: Expedition Vehicle Mercedes-Benz Atego 4x4 EBACAMP, mileage about 5000km

Location: Poland

Description:
⦁Construction of a container frame with a 3-point subframe system.
a)Container frame made of S355 steel painted with polyurethane paint, with a system of sleeves for attaching crates and a container suspension system.
b) 3-point suspension system (fully hot-dip galvanized).
⦁ The floor of the container is fully insulated. From the bottom of the vehicle, the floor is covered with laminate (protecting it completely against off-road conditions).
⦁ No wood or plywood in container construction
⦁ The length of the outer container is around 5650 mm length and 2440mm wide.
⦁ Container walls:
a) made of PET material, 60 mm thick
b) total thicknes 64mm

4. Internal and external corners of the container made of aluminium.
5. Container equipped with Optimal Expedition Windows
e) the ability to set the ventilation
f) number of side windows- 5
g) roof big window size quantity - 1 piece
6. Service doors and hatches THICKNESS 60mm
a) made of a PET and warm GRP profile with 2 and 3-point locks. With Locks
b) Doors with an additional ladder or electric steps (depending of the space)
c) flaps – 2 pieces
Mounted door and rubber sleeve connecting the container with the vehicle cabin. Door on the side of the container.
The container is equipped with reinforcing walls (partitions) and the base of the rear bed.

Complete container equipment with 2 x rear loading boxes, and side covering panels
The vehicle is prepared for the passage to the container (prepared passage in the cabin).
Rear combination lamps of the vehicle are mounted in the rear boxes.
Container equipped with marker lamps.
Chests, doors and hatches equipped with one lock system (1 key).

Kitchen:
⦁ Refrigerator Vitrifrigo 150l SLIM compressor with freezer - Total volume 150L
⦁ Induction cooker two-burner
⦁ The kitchenette is equipped with drawers with BLUM LEGRABOX Drawers and stainless steel locks that prevent opening while driving.
⦁ LED profiles illuminating the floor (warm light) are mounted in the lower pedestals of the kitchenette.
⦁ Furniture (cabinet & drawer doors) will be made with high quality HPL
⦁ Drawers equipped with luxury stainless steel locks
⦁ Water treatment system so that I have a separate drinking water tap in the kitchen
⦁ 24v and 230 volt sockets
⦁ Kitchen worktop made of luxurious Corian material
⦁ Dishwasher Siemens sk26e822eu

Bedroom:
-Large bed in the back make from the sofa 1400 x 2000mm
- Rear bed 1600 x 2000mm

living room:
⦁ table mounted on an electric leg
⦁ Sofa leather with pillows to prepare an extra bed
⦁ Additional LED lighting, 12 and 230 V sockets, USB

Bathroom :

⦁ shower tray
⦁ Shower
⦁ Yacht Dometic Toilet with a large tank for black water, black water tank - 100l
⦁ A system for pumping grey water into black water for cleaning purposes